 |
Openings
Assembler 4
Description:
Read and interpret Assembly drawings, perform eutectic die attach and component attach using epoxy in the Micro Integrated Circuits. Visual criteria requirement. Use of tweezers, pin vise, microscope, high power microscope, heater stage measurement.
Qualifications:
High school diploma or equivalent. Familiar with the use of microscope and heater stage measurement, kinetics dispenser for epoxy. Familiar with various epoxy and perform. Basic computer skills.
Shift: Swing
Type: Full-Time
Location: Sunnyvale, CA
Electronics Engineer 2
Description:
The purpose of this job is to design microwave & RF components including, but not limited to, amplifiers, mixers, detectors, filters and oscillators. This Engineer may also be required to support subsystems. The Engineer must be able to analyze and design RF/Microwave circuits. Must understand and be able to perform basic RF/Microwave measurements (i.e. Gain, NF, P-1DB, Return loss, VSWR, etc). Should be familiar with CAE tools (MWO, ADS, SPICE, etc) to perform circuit design. Must be familiar with basic lab equipment (i.e. power supplies, network analyzers, NF meters, etc.).
Qualifications:
Bachelor of Science in Electrical Engineering required, Masters of Science in Electrical Engineering optional. 1 to 5 years of related experience in the design of RF & microwave components necessary. Should be familiar with the basic computer programs such as Microsoft Office, Autocad, etc.
Shift: Day
Type: Full-Time
Location: Sunnyvale, CA
Technician 3
Description:
Test and tune microwave hybrid thin film amplifiers, oscillators and sub-assemblies. The ability to work utilizing a microscope for extended periods of time is required. Must have a working knowledge of microwave theory, understanding and relaying performance information about those circuits to co-workers and peers using common microwave terminology. Work using a microscope while tuning assemblies, ability to lift and move equipment weighing up to 50 lbs to bench locations for use. Must have experience operating all relevant test equipment such as oscilloscopes, spectrum analyzers, frequency counters, phase noise test stations, etc. Ability to use a PC to operate test stations, operate and navigate through software such as MS Windows XP. Experience using ball bonders and wedge bonders.
Qualifications:
2 year technical or Junior College education with emphasis on electronics and Microwave Electronics. Some educational training can be substituted by work experience or equivalent. 3 to 5 years working on Hybrid assemblies and subassemblies in a clean room environment.
Shift: Day
Type: Full-Time
Location: Sunnyvale, CA
Technician 4 (Swing Shift)
Description:
Test and tune microwave hybrid thin film amplifiers, oscillators and sub-assemblies. The ability to work utilizing a microscope for extended periods of time is required. Have a working knowledge of microwave theory, understanding and relaying performance information about those circuits to co-workers and peers using common microwave terminology. Work using a microscope while tuning assemblies. Ability to lift and move equipment weighing up to 50 lbs. to bench locations for use. Must have experience operating all relevant test equipment such as oscilloscopes, spectrum analyzers, frequency counters, phase noise test stations, etc. Ability to use PC to operate test stations, navigate through software such as MS Windows XP and MS Office.
Qualifications:
Experience using ball bonders and wedge bonders. 2 year technical or Junior College education with emphasis on electronics and Microwave Electronics. Some educational training can be substituted by work experience or equivalent. 5 or more years experience working on Hybrid assemblies and sub-assemblies in a clean room environment.
Shift: Swing
Type: Full-Time
Location: Sunnyvale, CA
|
